Quick Answer: Is A Subwoofer Cable Just An RCA Cable?

How do I connect my subwoofer to left and right input?

To connect a subwoofer to its receiver, you can use an LFE input cable or an RCA line-in cable (used for left and right input options).

Assuming your subwoofer has the option to use an LFE input, this will be your best choice.

But, if not, then an RCA input option will work..

What is the best cable for subwoofer?

#1 The Best Subwoofer Audio Cable Overall: AudioQuest Black.#2 The Best Budget Subwoofer Cable: Mediabridge Ultra Series.#3 AudioQuest Boxer.#4 AmazonBasics Cord.#5 AudioQuest Irish Red.#6 BlueRigger Cord.#7 Blue Jeans LC-1.

Can you use coaxial cable for RCA?

RCA connectors are attached to a small coax cable. You can tell if the cable is round, it’s coax. … In fact, even analog signals are run over coax in 99% of all RCA connectors. Pick up any cable with an RCA connector and it will be a coax.

Where do you connect the subwoofer to receiver?

The preferred method of connecting a subwoofer is through the Subwoofer Output (labeled as ‘SUB OUT’ or ‘SUBWOOFER’) of a receiver using an LFE ( an acronym for Low-Frequency Effects) cable. Almost all home theater receivers (or processors) and some stereo receivers have this type of subwoofer output.

What is RCA cable for subwoofer?

A subwoofer cable connects an audio amplifier to a speaker designed to reproduce low-frequency sound signals up to 100 Hz. … For a subwoofer with an RCA connector, any RCA cable will carry the signal. But some manufacturers add special features to an RCA cable and label it “subwoofer.”

Do subwoofer cables make a difference?

No, any RCA cable should work. Longer runs require better shielding, but there’s nothing special about the cable itself. Check out monoprice. And for those about to bring up true 75ohm, it won’t make a difference for subwoofers.

Can I use speaker cable for subwoofer?

Active subwoofers need a “phono” type connection to carry a signal from the subwoofer out terminal on the main surround receiver/amplifier. … A passive sub will use speaker cable to drive it. Subs produce low frequency outputs which require much more power to produce than higher frequencies.

Can I use coaxial cable for subwoofer?

Yes. You can use the Coax digital cable for a subwoofer connection without problem. However, things may not be entirely interchangeable. Digital coax cables and all video cables have a standard impedance of 75 ohms.

Are RCA cables better than coaxial?

Coaxial audio cable is better than analog RCA cables if and only if you can use it. Fiber optic cable sends the same digital stream as coaxial audio cable.

Can you convert a coaxial cable to RCA?

The first method will need a device like a VCR to connect the coaxial cable. Then the RCA output from the VCR will go the back of your device which lacks the coaxial input. The second method will use an adapter to convert coaxial cable to RCA through the threading process.

How do I connect my subwoofer to my TV?

Using a Direct Connection First, you need to locate the audio output port on your TV. Plug the HDMI cable to the TV’s port and then locate the audio input port on your subwoofer. Once you’ve found that, connect the other end of the HDMI cable to the subwoofer. And there you have it!

What cable do I need to connect subwoofer to receiver?

Plug with the RCA cable and choose L or R port on your subwoofer. If the cable is split at one end (i.e., it’s a y-cable for either the L or R port on your sub), then you’ll need to plug in both. If your receiver features both right and Left RCA plugs for the sub out, then you should also plug in both.

Is a coaxial cable the same as a RCA cable?

A digital coaxial connector looks like an RCA connector, but it transmits digital data instead of analog signals. … The digital coaxial cable is thicker than a typical audio cable, however, because it uses the same type of shielded coaxial cable you use to connect your television to your cable box.