How do you balance vocals in a mix?
Tip #1 – Here’s a top notch trick to get your vocals to sit on top of the mix nicely.
Send everything but the vocals to their own aux, and apply a very subtle compressor (only a few dB’s reduction).
Side chain the lead vocals to this compressor.
This will dip the track by a 2 or 3 dB’s every time the vocals come in..
Should Kick be louder than snare?
The snare is the foundation of the backbeat, and typically one of the loudest elements in the mix. Next, bring the kick fader up until it sounds almost as loud as the snare. It should be loud enough that the low frequencies are rich and powerful, but not so loud that it masks the bottom-end of the snare drum.
Where should vocals sit in a mix?
Every vocal is different and every song is different as well. But generally speaking, lead vocal should be moderately loud or the loudest element next to your drums in your mix.
What dB should vocals be in a mix?
If you mix them too loudly, they will stick out. What dB should vocals be recorded at? You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB.
How loud should vocals be in the mix Reddit?
In general, if the vocal is loud enough that you can hear all the lyrics clearly, it’s probably just right for pop and too loud for most other genres. If the vocal sounds a little bit “buried” or hard to hear in places, it will tend to make the music sound louder, and it will tend to make listeners turn up the volume.